Jailbreak a PC

Requirements

• 8GB USB Drive
• 2GB RAM (optional, but recommended)
• An internet connection

Packages

• The BIOSphere firmware
• Appmaker for BIOSphere
• Modder

Steps

1. Extract BIOSphere and run ./build. This will give you 3 files.
• firmware.fw
• install.iso
• fwback.back
2. Backup the 3 generated files if you extracted BIOSphere onto your USB
3. Using any tool, format your USB to FAT/FAT16/FAT32 and copy the contents of install.iso to your disk.
4. Boot from your USB and select 'Load and install BIOSphere'.
5. When your system reboots, press F6; S; ESC; F1. You should hear a beep after each key.
6. In the menu, select 'Search and flash firmware.fw'.
7. If it asks you to select a firmware.fw file, select the one from BIOSphere.
8. After the system shuts down, hold power+F1+F to boot into pack mode.
9. If you downloaded Appmaker and Modder before flashing BIOSphere, press F1; I; P; S; ENTER and select Appmaker.zip and Modder.zip then press F2. Else, press F2; W; L and connect to wifi then after, press F1; I; P; N; ENTER and type in
• https://clickfishteam.uk/pretendplay/jailbreakpretendpc/pkg/Appmaker.zip
• https://clickfishteam.uk/pretendplay/jailbreakpretendpc/pkg/Modder.zip